As a high-performance building partition in the field of industrialized production in my country, composite wall panels are made of a variety of building materials. With the continuous improvement of people's living standards, traditional bricks and tiles can no longer meet the needs of users. At the same time, composite wall panels are highly praised by everyone. The following editor will bring you the application and installation steps of composite wall panels. If you want to know more, come and have a look!

Composite wall panels have the obvious advantages of being environmentally friendly, energy-saving, pollution-free, lightweight, earthquake-resistant, fire-resistant, heat-insulating, sound-insulating, and quick to construct.

Characteristics of composite wall panels: Composite wall panels have the following characteristics: high strength, light weight, environmental protection, heat preservation, thermal insulation, sound insulation, fire prevention, moisture resistance and quick installation. They are ideal energy-saving wall materials for modern buildings.

Lightweight composite wall panels can be widely used in various types of building interior and exterior partitions, roofs, floors, and steel structure partitions. Its birth marks the inevitable trend of wall materials being updated and replaced by traditional blocks. Its new architectural concept and excellent performance meet the requirements of modern building environments.

Installation steps of composite wall panels:

1. Clearly locate the pre-built wall according to the actual drawings, remove the dust and excess mortar on the surface of the wall, ground, top, beam, column, etc., and level the surface;

2. The design requires that when making a guide wall, you can make a prefabricated concrete pad or a cast-in-place concrete guide wall. The center line of the guide wall should be consistent with the center line of the block wall.

3. Calculate the number of blocks in the length direction of the partition wall before the masonry wall is built. If there is less than one block in the end, the blocks can be made into the required size to fill the gap. Masonry walls generally do not require plastering. When building, the masonry should be built in a step-by-step manner from bottom to top, and the upper and lower seams are required to be staggered .

4. Lay out the lines and transport the boards in place: Pop up the double lines of the board thickness on the axis of the wall panel installation, and lift them to the wall according to the required specifications.

5. Sawing the board: Cut it with a portable electric saw according to the specifications of the wall.

6. Sizing: First, cement the tenon edges of the two boards, and then apply the polymer mortar on the tenon edge at will.

7. Installation: Move the strips to be installed to the assembly position, use a crowbar to calibrate the wall panels, use a force to crowbar tightly, squeeze the polymer mortar from the joint until it is full, and then temporarily fix it with a wooden wedge.

8. Correction and fixation: Use a ruler of 2 meters or more to check the verticality and flatness correction, and then fix it with Φ6mm or Φ8mm ribbed steel bars and construction glue.

9. Grouting and grouting: Fill the corrected wall panels with polymer mortar, scrape them flat, and fill the upper and lower gaps with fine stone concrete.

10. Paste anti-crack cloth: After the grouting polymer and the wall are all finalized, paste the fiberglass cloth on all joints with latex.

11. Install wires and switches; lay out the positions of hidden wires and switch boxes, then cut the grooves with a portable electric saw, and fill them with polymer mortar after installation.

12. Install door frames: Reserve door and window openings on the installed wall and anchor them with plywood or lines at will.

13. Facing tiles and decorative panels: tiles or other wood veneers can be freely pasted on the installed walls without plastering.

14. Electrical installation: lamps, furniture, air conditioners can be freely installed in the installed room, nails or hangs.

The above is the application and installation steps of composite wall panels brought to you by the editor, I hope it can help you. In order to allow more practitioners to enrich their knowledge and improve their work efficiency, I hope you can forward the editor's article vigorously, welcome to adopt!